Preparing for Transport

causym CAUTION: Prevent collisions between other road users, slow moving tractors with attachments or towed equipment, and self-propelled machines on public roads. Frequently check for traffic from the rear, especially in turns, and use hand signals or turn signal lights.

Use headlights, flashing warning lights, and turn signals day and night. Follow local regulations for equipment lighting and marking. Keep lighting and marking visible and in good working order. Replace or repair lighting and marking that has been damaged or lost. An implement safety lighting kit is available from your John Deere dealer.

1. Attach SMV emblem. Be sure SMV emblem and warning lights are clean and visible.

TS951

EX,820L,A -19-04OCT95-1/3

causym CAUTION: A safety chain will help control drawn equipment should it accidentally separate from the drawbar. Using the appropriate adapter parts, attach the chain to the tractor drawbar support or other specified anchor location. Provide only enough slack in the chain to permit turning. See your John Deere dealer for a chain with a strength rating equal to or greater than the gross weight of the towed machine. Do not use safety chain for towing.

2. Attach safety chain (A). Provide only enough slack in the chain to permit turning.

E37211

EX,820L,A -19-04OCT95-2/3

3. Put jackstand (A) in storage position. Fasten with pin and quick-lock pin.

E37212

EX,820L,A -19-04OCT95-3/3