Loading Left-Hand and Right-Hand Twine Boxes

1. Place three balls of good quality twine in each twine box. Be sure twine is pulled from end of the ball marked "top".

IMPORTANT: The twine knot must be small enough to pass through the guides and twine arm.

2. Join twine by tying the inside end of one ball to the outside of other ball.

  • Tie plastic twine balls together with a sheet bend knot.
  • Tie sisal twine balls together with a square or modified square knot.

3. Trim loose ends of twine as close to knot as possible.

E26419

Plastic Twine (Sheet Bend Knot)

E7986

Sisal Twine (Modified Square Knot)

AG,OUO6017,1581 -19-26OCT99-1/1