Adjusting Net Wrap Roll Support Brackets
1.
Put a straight edge across both support brackets (A). Be sure straight edge is long enough to contact both support brackets.
A-Support Brackets
|
|
|
|
AG,OUO6017,857 -19-08JUN99-1/3
|
|
2.
Measure distance (A). Make sure contact area between the straight edge and support brackets meets specifications from each side panel.
Specification
|
Straight Edge-to-Support Bracket
-Distance
|
102-152 mm
|
(4-6 in.)
|
A-Distance
|
|
|
|
AG,OUO6017,857 -19-08JUN99-2/3
|
|
3.
Move bracket using adjustable wrench (A) (as shown) until contact area is to specification.
A-Adjustable Wrench
|
|
|
|
AG,OUO6017,857 -19-08JUN99-3/3
|
|
