Machine Specifications-456, 456 Silage Special and 5561

  456 456 Silage Special 556
BALER DIMENSIONS
Length: Gate Closed; w/o Net Wrap 3612 mm (142.2 in.) 3612 mm (142.2 in.)
Length: Gate Closed; w/ Net Wrap 3980 mm (156.7 in.) 3980 mm (156.7 in.)
Length: Gate Open 4542 mm (178.8 in.) 4542 mm (178.8 in.)
Height: Gate Closed 2597 mm (102.2 in.) 2597 mm (102.2 in.)
Height: Gate Open 3251 mm (128 in.) 3251 mm (128 in.)
Width: Regular or MEGATOOTH™ Pickup 2451 mm (96.5 in.) 2500 mm (98.4 in.) 2847 mm (112.1 in.)
Width: Wide Pickup 2516 mm (99 in.) 2565 mm (101 in.) -
BALER WEIGHT 1733 kg (3820 lb) 1901 kg (4190 lb) 1975 kg (4310 lb)
BALE
Diameter 889-1524 mm (35-60 in.) 889-1524 mm (35-60 in.)
Width 1171 mm (46.1 in.) 1565 mm (61.6 in.)
Typical Weight 499 kg (1100 lb) 658 kg (1450 lb)
Maximum Weight 794 kg (1750 lb) 794 kg (1750 lb)
REGULAR PICKUP
Width: Inside 1166 mm (45.9 in.) - 1560 mm (61.4)
Width: On Flare 1410 mm (55.5 in.) - 1803 mm (71 in.)
Width: Between Outer Teeth 1123 mm (44.2 in.) - 1519 mm (59.8 in.)
Drive Roller chain with V-belt - Roller chain with V-belt
Bars 4 - 4
Number of Teeth 36 (72 tines) - 48 (96 tines)
Tooth Spacing 66 mm (2.6 in.) - 66 mm (2.6 in.)
Stripper Diameter 254 mm (10 in.) - 254 mm (10 in.)
MEGATOOTH™ PICKUP
Width: Inside 1166 mm (45.9 in.) 1560 mm (61.4)
Width: On Flare 1410 mm (55.5 in.) 1803 mm (71 in.)
Width: Between Outer Teeth 1123 mm (44.2 in.) 1519 mm (59.8 in.)
Drive Roller chains with slip clutch Roller chains with slip clutch
Bars 4 4
Number of Teeth 28 (56 tines) 40 (80 tines)
Number of Mega Teeth 16 (16 tines) 16 (16 tines)
Tooth Spacing 66 mm (2.6 in.) 66 mm (2.6 in.)
Stripper Diameter 254 mm (10 in.) 254 mm (10 in.)

 

1(Specifications and design subject to change without notice.)

AG,OUO6017,588 -19-28APR99-1/3

WIDE PICKUP
Width: Inside 1560 mm (61.4 in.) -
Width: On Flare 1803 mm (71 in.) -
Width: Between Outer Teeth 1519 mm (59.8 in.) -
Drive Roller chains with slip clutch -
Bars 4 -
Number of Teeth 48 (96 tines) -
Tooth Spacing 66 mm (2.6 in.) -
Stripper Diameter 254 mm (10 in.) -
FORMING BELTS
Number 6 8
Width 178 mm (7 in.) 178 mm (7 in.)
Type 3-Ply combination nylon polyester, diamond tread, friction surface, with wire-type splices 3-Ply combination nylon polyester, diamond tread, friction surface, with plate-type splices 3-Ply combination nylon polyester, diamond tread, friction surface, with wire-type splices
Length (2) 11709 mm (461 in.)
(4) 11849 mm (466.5 in.)		 (4) 11709 mm (461 in.)
(4) 11849 mm (466.5 in.)
BALE WRAP
Type Double twine wrap (standard)
Net wrap (optional, electric)		 Double twine wrap (standard)
Net wrap (optional, electric)
Control Manual Manual
Actuator Type Hydraulic (standard)
Electric (optional)		 Hydraulic (standard)
Electric (optional)
Twine Spacing Operator controlled w/visual indicators. Adjustable via flow valve if equipped with hydraulic twine wrap. Operator controlled w/visual indicators. Adjustable via flow valve if equipped with hydraulic twine wrap.
MECHANICAL BALE FORMING INDICATORS (On Baler)
Bale Size Pointer/scale Pointer/scale
Twine Arm Position Pointer/scale Pointer/scale
ELECTRICAL BALE FORMING INDICATORS (BALE WATCH™ Monitor)
Bale Shape Gauges Gauges
Bale Size Alert Buzzer; set point adjustable to desired bale size.
Indicates near, full and oversize bale		 Buzzer; set point adjustable to desired bale size.
Indicates near, full and oversize bale
GEAR CASE OIL CAPACITY (On Baler) 1.2 L (1.25 U.S. qt) 1.2 L (1.25 U.S. qt)
TIRE SIZE
Standard 11L-14, 8 ply rating 31 x 13.5L-15, 8 ply rating 11L-14, 8 ply rating
Optional (Hi-Flotation) 31 x 13.5L-15, 8 ply rating - 31 x 13.5L-15, 8 ply rating
POWER TRAIN
PTO Shaft Speed 540 rpm 540 rpm
Drive Protection Shear bolt or optional slip clutch Shear bolt or optional slip clutch

 

AG,OUO6017,588 -19-28APR99-2/3

TRACTOR RECOMMENDED
Minimum Power 41 kW (55 hp) 41 kW (55 hp)
Hydraulics (Recommended) Two double-acting selective control valves. Two double-acting selective control valves.

 

AG,OUO6017,588 -19-28APR99-3/3