Turn Signal Lights
NOTE:
The turn signals function whenever the ignition key is in the ACCESSORY or the RUN position.
The turn signals are not self-cancelling.
The indicator light on the steering column glows steadily indicating the signal is operating.
When transporting the windrower, light control switch should be in the third position, and the hazard lights operating. The turn signal function will override the hazard function until the turn signal is cancelled.
The platform turn signal lights are for oncoming vehicles. Do not transport the windrower without the platform attached.
The high side element, in both tail lights, is activated when the turn signal is applied. The high side element is as bright as a brake light.
When the right turn signal is applied, the high element of the right amber (A), right tail light (B) and the right platform light (C) will flash 90 flashes per minute. The high element of the left amber light, left tail light and left platform light will burn continuously. The opposite occurs when the left turn signal is applied.
A-Amber Light
B-Tail Light
C-Platform Light
|