Transporting and Daytime Running Lights

NOTE: The platform hazard lights are for oncoming vehicles. Do not transport the windrower without the platform attached.

The red side marker lights, amber side marker lights, tail lights, hazard lights and platform hazard lights are on both sides of the machine.

• Daytime running lights are on when the ignition key is in the ACCESSORY or RUN position, and the FIELD/ROAD switch is in the ROAD position.
• They are turned off when the ignition key is turned to the OFF position or the FIELD/ROAD switch is moved to the FIELD position.
• The console display is on but the tachometer display will not dim.
• To dim the tachometer display, use the third position on the light switch.

AG,OUO6038,1080 -19-08OCT99-1/2

When the light control switch is in the third position or the daytime running lights are on, the four head lights (A), tail lights (B), red side marker lights (C), amber side marker lights (D), rear hazard lights (E), and platform hazard lights (F) are on and the turn signals are functional.

A-Head Lights
B-Tail Light
C-Red Side Marker Light
D-Amber Side Marker Light
E-Rear Hazard Light
F-Platform Hazard Light

AG,OUO6038,1080 -19-08OCT99-2/2