Stopping Engine

NOTE: The hydrostatic ground drive lever must be at rest to the left in the neutral position. This will engage the neutral switch (E).

The steering is locked and the park brake is hydraulically applied while the neutral switch is engaged.

1. Move hydrostatic drive control lever (A) to neutral.

2. Move field/road switch (C) to field position.

3. Disengage platform drive (D).

4. Move engine speed switch (B) to low speed. Allow the engine to operate at low rpm for 1-3 minutes.

5. Lower platform to the ground.

IMPORTANT: After engine has stopped, remove the key to prevent unauthorized operation or tampering.

Key can not be removed unless switch is in OFF position, preventing accidental battery discharge.

6. Turn ignition switch OFF and remove the key.

A-Hydrostatic Drive Control Lever
B-Engine Speed Switch
C-Field/Road Switch
D-Platform Drive
E-Neutral Switch

AG,OUO6038,1086 -19-08OCT99-1/1