Fuel Transfer Pump
If engine is losing power from a possibly faulty fuel transfer pump (C), drain water from filter first.
NOTE:
If the primer does not pump fuel and no resistance is felt at the upper end of the lever stroke, turn the engine slightly with the starter to change the fuel pump cam position.
Loosen filter drain plug (D). Pump primer lever (B) on fuel transfer pump (C) until fuel flows out of filter drain, close filter drain plug.
Loosen air bleed vent screw (A) and pump primer lever (B) on fuel transfer pump until fuel flows out from around bleed plug. Tighten bleed plug .
If draining water from the filter did not help, then change fuel filter before replacing fuel pump.
|