Draining Water from Fuel Filter

NOTE: If the primer does not pump fuel and no resistance is felt at the upper end of the lever stroke, turn the engine slightly with the starter to change the fuel pump cam position.

1. Loosen filter drain plug (D). Pump primer lever (B) on fuel transfer pump until fuel flows out of filter drain. Leave the pump primer lever down and close filter drain plug.

2. Loosen air bleed vent screw (A) and pump primer lever (B) on fuel transfer pump until fuel flows out from around bleed plug. Leave pump primer lever down and tighten air bleed vent screw.

A-Air Bleed Vent Screw
B-Primer Lever
C-Fuel Transfer Pump
D-Drain Plug

AG,OUO6038,1140 -19-08OCT99-1/1