Warning Light Bulb Replacement

Remove four screws (A) and remove gauge panel (B).

NOTE: It is not necessary to remove circuit board (C) from panel. Circuit board removed for photo purposes.

Unplug harnesses from panel.

IMPORTANT: Do not force bulbs. Apply an even pressure when removing and installing. Handle circuit board carefully, do not throw or drop. Unnecessary roughness will result in damage to the circuit board (C).

NOTE: It may be necessary to use a pair of pliers to remove bulb.

Gently turn bulb (D) counterclockwise and remove bulb.

Turn bulb clockwise until it seats in position when installing.

A-Screw
B-Panel
C-Circuit Board
D-Bulb

AG,OUO6038,1168 -19-11OCT99-1/1