Replacing Platform Pump Drive Belt

1. Loosen jam nuts (A) and relieve spring (B) tension.

2. Remove shields (C) and (D).

3. Remove four cap screws (E) and plate (F)

4. Replace drive belt (G).

5. Install plate, shields and adjust belt tension. See ADJUSTING PLATFORM PUMP DRIVE BELT in this section.

A-Jam Nuts
B-Spring
C-Shield
D-Shield
E-Cap Screws
F-Plate
G-Drive Belt

AG,OUO6038,1212 -19-11OCT99-1/1