Checking Operator Presence Switch

IMPORTANT: If the operator presence switch fails to function properly, see your John Deere dealer.

To check the function of the operator presence switch. With the windrower started, the platform switch engaged with platform operating, do the following:

  • Raise up out of the seat for three (3) seconds, then sit down again. The platform should continue to operate normally.
  • Raise up out of the seat for 5-6 seconds. The platform should stop operating. If platform stops, operator presence switch is functioning properly. If the platform does not stop, see your John Deere dealer for replacement of the switch.
H39392

AG,OUO6038,1257 -19-21OCT99-1/1