Attaching Implements to 3-Point Hitch

1. Be sure drawbar will not interfere. If necessary, move drawbar ahead or remove it. Check for any other potential interference.

CAUTION: Prevent unexpected movement of rockshaft by placing draft sensing lever in the forward position before attaching implement to hitch.

2. Back tractor up to implement (B) so that hitch points are in line. Engage parking brake and stop the engine before leaving the tractor's seat.

3. Slip draft links over implement hitch pins (C), and retain with quick-lock pins.

NOTE: Locking pins can be stored on draft links when not in use.

AT,5SOM,62 -19-01OCT96-1/1