Adjusting Front Wheel Tread
|
|
Front wheel tread can be adjusted by re-positioning or reversing the rims or by reversing the wheel disks. IMPORTANT: Always mount nuts on rim side. In addition the complete wheel can be reversed and installed on the opposite side of the tractor. The arrow |
on side wall of tire must then point in the direction of forward travel.
NOTE: The illustration shows the right-hand front wheel. Tread widths are measured at the lowest point of the tires. |
| Position of Rims and Wheel Disks (5310, 5410 and 5510 Tractors) | ||||||||
|---|---|---|---|---|---|---|---|---|
| Tires | A | B | C | D | E | F | G | H |
| 11.2R20 | 1304 mm (51.3 in.) |
1400 mm (55.1 in.) |
1564 mm (61.6 in.) |
1584 mm (62.4 in.) |
1660 mm (65.4 in.) |
1680 mm (66.1 in.) |
1844 mm (72.6 in.) |
1940 mm (76.4 in.) |
| 375/75R20 | 1304 mm (51.3 in.) |
1400 mm (55.1 in.) |
1564 mm (61.6 in.) |
1584 mm (62.4 in.) |
1660 mm (65.4 in.) |
1680 mm (66.1 in.) |
1844 mm (72.6 in.) |
1940 mm (76.4 in.) |
| 9.5R24 | 1317 mm (51.9 in.) |
1430 mm (56.3 in.) |
1470 mm (57.9 in.) |
1583 mm (62.3 in.) |
1717 mm (67.6 in.) |
1830 mm (72.0 in.) |
1869 mm (73.6 in.) |
1982 mm (78.0 in.) |
| 11.2R24 | 1292 mm (50.9 in.) |
1405 mm (55.3 in.) |
1495 mm (58.9 in.) |
1608 mm (63.3 in.) |
1691 mm (66.6 in.) |
1804 mm (71.0 in.) |
1894 mm (74.6 in.) |
2007 mm (79.0 in.) |
| 320/70R24 | 1292 mm (50.9 in.) |
1405 mm (55.3 in.) |
1495 mm (58.9 in.) |
1608 mm (63.3 in.) |
1691 mm (66.6 in.) |
1804 mm (71.0 in.) |
1894 mm (74.6 in.) |
2007 mm (79.0 in.) |
| 260/80R20 | 1518 mm (59.8 in.) |
1606 mm (63.2 in.) |
1384 mm (54.5 in.) |
1472 mm (58.0 in.) |
1778 mm (70.0 in.) |
1866 mm (73.5 in.) |
1644 mm (64.7 in.) |
1732 mm (68.2 in.) |
OULXA64,000025D -19-20JUN01-1/1 |