Transporting mounted implements (EHS II)

AT15970-UN-27SEP06

Transport lock switch (with red LED)

To activate the transport lock, press and hold the switch for more than 5 seconds. The hitch will then raise the implement to the previously adjusted height limit (see ”Height Adjustment”).

A red LED indicates that the transport lock is activated.

NOTE: The LED begins flashing if a Diagnostic Trouble Code is present. Different flashing sequences are assigned to the Diagnostic Trouble Codes, see Section ”Troubleshooting”, ”E-SCV, Diagnostic Trouble Codes”.

CAUTION: Ensure that the height limit is adjusted correctly and that the height limit control is activated (green LED at height limit memory switch).

Otherwise the hitch will lift the implement all the way up which can cause injuries or damage.