Bulb Replacement — Safety Instructions

When replacing a bulb, always comply with the following safety instructions:

CAUTION: Always switch the lights off before you change a bulb.

CAUTION: First allow the bulb to cool down (may cause burns).

CAUTION: Wear safety goggles and gloves when changing the bulb.

CAUTION: The bulb is made of glass and contains gas; the bulb is under high pressure, so there is a risk of it shattering.

CAUTION: Do NOT use any bulbs that have fallen on the ground or have scratches on their surface, as there is a risk of them shattering.

CAUTION: Make sure that the bulb is seated correctly in its holder in the light.

CAUTION: Check the light for signs of damage and make sure the seals are seated correctly.

IMPORTANT: Use only bulbs that require 12 volts and are of the same type and wattage as the bulb that is being replaced.

IMPORTANT: Never touch the glass surface of the bulb, hold it only by its base.

IMPORTANT: Use a clean cloth and alcohol to remove any fingerprints from the glass bulb.