Hitch Control Levers

AGCPTJD0632-UN-27OCT14

The hitch position is controlled by two levers, the position control lever (A) and the draft control lever (B).

CAUTION: To avoid unintentional lowering of the implement during transport, use stop (C) to lock position control lever (A).

During transport and when hitch is not in use, push draft control lever (B) all the way forward.

The position control lever (A) raises the three-point hitch when pulled rearward and lowers the three-point hitch when moved forward. For further information refer to Use the Hitch Position Control in this Section.

The draft control lever (B) controls the three-point hitch position relative to draft loads. For further information refer to Use the Draft Control in this Section.