Service (Every 1000, 1250, 1500, 2000 Hours and Annually Services)

Service procedure

Perform all tasks marked - In addition carry out the 10 hour service

Every 1000 hours

Every 1250 hours

Every 1500 hours

Every 2000 hours

Annually

Transmission - Replace transmission oil filter, check oil level

 

Engine - Change engine oil

 

Engine - Change engine oil filter

 

Fuel system - Replace fuel strainer

     

 

Front PTO - Check oil level

 

Front PTO - Change oil and replace oil filter

 

 
           

Clutch and PTO clutch - Check free play

 

Brake system - Check oil level

 

Brake system - Check free play of park brake and foot brakes

 

Drawbar - Check torque on attaching screws

 

Height-adjustable trailer hitch - Check torque on attaching screws

 

Trailer hitch - Check torque on attaching screws

 

Steering system - Lubricate tie rod ends

 

Front loader - Mounting frame, check torque on attaching screws

Wheels - Check torque of wheel and rim bolts

 

Trailer hitch - Lubricate all grease fittings

 

Front-wheel drive axle - Lubricate pivot pin and king pins

 

Front-wheel drive axle - Lubricate wheel bearings

 

Front-wheel drive axle - Lubricate all universal joints including u.j. shaft from transmission to front-wheel drive axle

 

Front-wheel drive axle - Check oil level in axle housing and final drive housings

 

Rear axle - Lubricate bearings

 

Check neutral start circuit

 

Alternator drive belt - Check for wear and damages, check belt tension

 

Check condition of water pump

 

 
           

Fuel system - Replace fuel filter and bleed fuel system

 

 

Fuel system - Drain residue from fuel tank

 

 

Three-point hitch - Lubricate lift links and rockshaft

 

 

Air intake hoses - Check connections for leaks

 

 

Components of drawbar, and trailer hitches - Check all components for wear; check all components function properly

 

 
           

Check engine speeds, have speeds adjusted by your John Deere Dealer™

   

   

Front axle pivot pins - Let the John Deere dealer check the end play

   

   

Cab and ROPS - Check torque of mounting bolts and nuts

   

   
           

On F5C engine replace the alternator drive belt

   

 

On NEF engine check belt tension

     

 

On F5C engine check and adjust the engine valve clearance

   

 

On NEF engine check and adjust the engine valve clearance

     

 
           

Transmission and hydraulic system - Replace suction strainer

 

     

Transmission and hydraulic system - Change oil and oil filter

 

     
           

Front-wheel drive axle - Drain oil and refill with fresh oil

   

   

Brake system - Have brake system oil changed by your John Deere™ dealer

   

   

Air intake system - Replace air cleaner

   

   
           

Inspect seat belt for damage and ensure proper working order

       

Inspect hydraulic hoses

       

OULXBER,000251A-19-20141030