iTEC - Delete Sequence

1. 
   LX1045725-UN-16AUG10

   
   LX1045724-UN-17AUG10

   E - Save/Enter Softkey

   H - Softkey for Start/End Recording of Sequence

   J - Cancel Softkey

   Select the iTEC home page and then press the iTEC ON/OFF softkey. For more information, see iTEC - Home Page, Enter Program Mode in this Section.

---




2. Make sure that iTEC is switched on. At the same time, the iTEC indicator light lights up on the instrument panel.

3. Navigate to drop-down box (1, implement selection) and select desired implement.

4. Use the sequence softkey to select Sequence 1 or 2. When the sequence has been selected, the relevant display appears.

5. Select softkey for Advance Settings.

6. Select softkey (H; start/end recording of sequence) and confirm twice.

7. Select softkey (E) to delete the sequence or softkey (J) to cancel the process.