Check the Neutral Start Circuit - PowrQuad™ Plus and AutoQuad™ Plus Transmission

LX1045653
LX1045653-UN-13OCT10

LX1045654
LX1045654-UN-07OCT10

A - Range-Shift Lever

B - Reverse Drive Lever

  1. Move range-shift lever (A) to neutral.

  2. Move the reverse drive lever (B) to forward or reverse position.

  3. Start the engine and wait 6-7 seconds. The N display must light up.

  4. Press the clutch and engage any range. Gradually release the clutch pedal. The tractor must NOT start to move. If it does, see your John Deere™ dealer immediately.

OULXA64,0002D6E-19-20121218