Service (Daily / Every 10, After 100, Every 250 and 500 Hours)

Service procedure

Every 10 hours or daily

After the first 100 hours

Every 250 hours

Every 500 hours

Lights - Check that all lights (including headlights) are functioning properly

     

Fuel system - Drain water and sediment from fuel filter

     

Engine - Remove trash from area surrounding the engine

     

Cooling system/air-conditioning system - Clean the radiator and condenser, fins and screens

     

Air brake system - Check compressed air tank for condensed water. If condensed water drains out, replace air-drier cartridge, otherwise do this every 1500 hours or every 2 years at the latest (see Service - Every 1500 Hours or 2 Years).

     

Check brakes

     

Oil level - Check the transmission/hydraulic system

     

Check the level of oil in the engine

     

Cooling system - Check coolant level

     

Front hitch - Lubricate cylinder and three-point hitch

     

Lubricate all trailer hitches

     

Three-point hitch - Lubricate lift links and rockshaft

     

Front axle - Lubricate knuckle pin bearing

     

Front-wheel drive axle - Lubricate all universal joints including u.j. shaft from transmission to front-wheel drive axle

     

Front-wheel drive axle with TLS - Lubricate Panhard link and hydraulic cylinder

     

Access the diagnostic trouble codes, rectify fault and then delete the codes.

 

   

Lights - Check that all lights (including headlights) are functioning properly.

 

   

Cab - Cab supports, check torques of attaching screws (see Service - Every 250 Hours).

 

   

Drawbar - Check torques of attaching screws (see Service - Every 250 Hours).

 

   

Height-adjustable trailer hitch - Check torques of attaching screws (see Service - Every 250 Hours).

 

   

Trailer hitch - Check torques of attaching screws (see Service - Every 250 Hours).

 

   

Pick-up hitch - Check torques of attaching screws (see Service - Every 250 Hours).

 

   

Front loader - Mounting frame, check torques of attaching screws (see Service - Every 250 Hours)

 

   

Front hitch - Mounting frame, check torques of attaching screws (see Service - Every 250 Hours).

 

   

Front PTO - Have torque of torsion damper attaching screws checked by your John Deere™ dealer.

 

   

Air intake hoses, check for leaks (see Service - Every 250 Hours).

 

   

Hydraulic system - Replace hydraulic oil filter (see Service - Every 750 Hours).

 

   

Transmission - Replace transmission oil filter (see Service - Every 750 Hours).

 

   

Front-wheel drive axle - Final drives with disk brake, oil change (see Service - Every 750 Hours).

 

   

Front-wheel drive axle - Final drives without brake, oil change (see Service - Every 1500 Hours or 2 Years).

 

   

Front-wheel drive axle - Axle housing, oil change (see Service - Every 1500 Hours or 2 Years).

 

   

Access the diagnostic trouble codes, rectify fault and then delete the codes

   

 

Check neutral start circuit

   

 

PTO actuation - Check safety device

   

 

Lights - Check settings of headlights

   

 

Load center - Visual inspection, and clean

   

 

Fuel system - Drain water and sediment from fuel tank

   

 

Wheels - Front and rear wheels, check torques of attaching screws

   

 

Wheels - Wheel disk to rim, check torques of attaching screws

   

 

Wheels - Wheel weights, check torques of attaching screws

   

 

Wheels - Dual wheel attachment, check torques of attaching screws (see manufacturer's specifications)

   

 

Cab - Cab supports, check torques of attaching screws

   

 

Cab - Ground cable, check torques of attaching screws

   

 

Drawbar - Check torques of attaching screws

   

 

Height-adjustable trailer hitch - Check torques of attaching screws

   

 

Trailer hitch - Check torques of attaching screws

   

 

Pick-up hitch - Check torques of attaching screws

   

 

Front loader - Mounting frame, check torques of attaching screws

   

 

Front hitch - Mounting frame, check torques of attaching screws

   

 

Check oil level - Front-wheel drive axle, axle housing

   

 

Check oil level - Front-wheel drive axle, final drives

   

 

Check oil level - Front PTO

   

 

Air intake hoses, check for leaks

   

 

Foot brakes, operational check

   

 

Emergency brake, operational check

   

 

Park lock, operational check

   

 

Trailer hitches - Check all components for wear; check that all components function properly

   

 

Air brake system - Check the time needed for filling

   

 

Air brake system, check function of park position (park lock)

   

 

Air brake system - Visual inspection and operational check of couplers

   

 

Lubricate pivoting fenders, and perform operational check

   

 

Suspended cab, lubricate the grease fittings on suspension system

   

 

Rear PTO, lubricate stub shaft support (with turnable stub shaft)

   

 

Check that all accessible ground cables are secure

     

Engine - Check drive belt for wear

     

Engine - Change engine oil filter

     

Engine - Change engine oil

     

Fuel system - Change fuel filter

     

Have brake system bled and checked by a John Deere™ dealer

     

Lubricate the draft link bearings (if equipped)

     

Lubricate the rear axle bearings (if equipped)

     

Change activated carbon filters of cab, if equipped

     

OULXBER,00019CC-19-20130517