Windows are important for the protection of the operator and the safe operation of the machine. Inspect windows regularly. If cracks or surface crazing are observed, replace window.

To clean the windows, use a solution of mild soap or detergent and lukewarm warm water. Use a soft cloth or sponge to loosen dirt. Do not scrub. Rinse well with clean water and dry with a chamois.

Acceptable soaps and detergents include mild dish washing detergent and other household products. Test any intended cleaning product in an unobtrusive spot. Cleaning should never be done in direct sunlight or at high temperatures.

IMPORTANT: DO NOT USE ABRASIVE OR HIGHLY ALKALINE SOLVENTS AS CLEANING AGENTS.

Labels and stickers can be removed using compatible solvents. Wash the window with soap and water and rinse thoroughly to remove any trace of solvents.

Acceptable solvents include aliphatic hydrocarbons, kerosene, Naptha (VM-P grade) and petroleum spirits. Alcohol solvents such as methanol, ethanol

Some cleaning solvents may attack the window material, resulting in cracks that may weaken the window. DO NOT USE BENZENE, GASOLINE, ACETONE, OR CARBON TETRACHLORIDE.

CAUTION: Make sure the work area is well ventilated when working with organic solvents.

Solvent fumes can be hazardous to health if proper safety precautions are not taken.

Do not smoke around organic solvents. Solvents can cause risk of fire if proper safety precautions are not taken.

Do not use any kind of sharp instrument to scrape the window material.

Hairline scratches and minor abrasions can be removed or minimized with automobile polish. Test any intended polishing product in an unobtrusive spot.

OUTJ003,000081D -19-15SEP01-1/1