General Troubleshooting
This section describes some typical problems that can be experienced with the various components or systems of the machine. The problems listed are not all the problems which can be encountered, but primarily those an operator can diagnose and repair. Consult your authorized servicing dealer for diagnosis and repair of problems that are referenced as such or not listed in this section. A systematic approach to troubleshooting is essential and should include the following suggestions:
If the problem cannot be solved easily in the field, the use of this chart should provide sufficient information to assist an authorized dealer to predict which tools or replacement items to bring to the site or to suggest the movement of the machine to a shop.
-
Study the problem thoroughly before acting.
-
Do the easiest and obvious things first.
-
Find and correct the basic cause of the problem.
-
After making repairs, operate the equipment under normal conditions to verify that the problem and its cause has been corrected.
|