CAUTION: Before performing any maintenance procedure, read and understand the Safety Precautions described in Sections 1-2, 1-3 and 1-4.

Failure to observe proper safety procedures may result in machine damage, personal injury.

Before performing maintenance procedures given in the following chapters and before leaving the operators seat, park the machine as described below unless another position is specified in the procedure.

IMPORTANT: Turbocharger may be damaged if engine is not properly shut down.

2. Run engine at 1/2 speed for 2 minutes before stopping to avoid damage to turbocharger.

3. Move throttle to slow idle position.

4. Turn key switch OFF. Remove key from switch. (If maintenance must be performed with engine running, DO NOT leave machine unattended.)

5. Move the Battery Disconnect Switch to OFF.

6. Disconnect the battery ground cable.

7. Attach a "Do Not Operate" tag to the key switch.

OUTJ003,0000A88 -19-20NOV01-1/1