| Location |
Recommended Fluid |
Capacity |
| 6081 Engine Break-in Oil (First 100 Hours) |
John Deere ENGINE BREAK-IN OIL
Engine oil meeting API Service Classification CE; CCMC Specification D4. |
28.5 L
(30.12 qt) |
| 6081 Engine Oil (After first 100 hours) |
JOHN DEERE PLUS-50 Diesel Engine Oil
Engine oil meeting API Service Classification CH-4, CG-4, CF-4; ACEA Specification E3, E2.
Choose viscosity to suit operating temperature. |
28.5 L
(30.12 qt) |
| Swing Gearbox Oil |
John Deere GL-5 Lubricant
Oils meeting API Service Specification GL-5
Initial change at 100 hours then at scheduled intervals. |
6.8 L
7.2 qt) |
Hydraulic System
Main Reservoir |
John Deere HY-GARD
Oil meeting John Deere Standard JDM J20C, J20D
Choose viscosity to suit operating temperature.IMPORTANT: Do not mix different oils. When in doubt, contact manufacturer. Use of improper oil may void warranty. |
378 L
(100 gal) |
| Fuel Tank |
ASTM. designation D-975
Below 0°C. (32°F)
No. 1-D Above 0°C. (32°F) No. 2-D |
378 L
(100 gal) |
| Grease |
John Deere HD MOLY GREASE
SAE multi-purpose grease with EP performance and 3% Molybdenum Disulphide |
As Required. |
| Engine Cooling System |
John Deere COOL-GARD Pre-diluted coolant.
ASTM Designation D5345 (Pre-diluted Coolant)
ASTM Designation D4985 (Coolant Concentrate)
A permanent anti-freeze mixed solution (ethylene glycol base) as a year round fill. |
30.0 L
(8 gal) |
| Windshield Washer Fluid Tank |
Concentration of washer fluid and water to suit ambient temperature |
N/A |
| Air Conditioner System |
R-134A (CFC Free) refrigerant |
N/A |
| Air Conditioner Compressor |
Synthetic Compressor Oil (PAG) |
N/A |