Check Hydraulic Oil Level

IMPORTANT: When checking the hydraulic fluid level, the loader must be level with the booms fully extended, the grapple head supported and the stabilizers in the raised position. Failure to configure the loader in this manner will lead to false fluid level reading and possible equipment damage.

Check the fluid level at the sight glass (A) on the hydraulic tank.

Add hydraulic fluid as required.

See Section 3-1 for the recommended hydraulic oil.

NOTE: Hydraulic oil is added using the filler pump. See Section 3-9 for the procedures.

A-Hydraulic Oil Level Sight Glass

OUTJ003,0000BE9 -19-21JAN02-1/1