Saw Drive Switch

This is a two position (ON/OFF) switch that controls the hydraulic oil flow from the Attachment Pump to the Felling Head Motor.

Press switch to "l" position to engage saw drive. When the saw is turned on a yellow caution light in the switch will remain illuminated.

MR64971,0000042 -19-05DEC01-1/2

Depress switch to "0" position to disengage the saw drive.

NOTE: If the ignition switch is turned OFF with the saw drive switch in the ON position, the saw will not restart. Move both the saw drive switch and the pilot control valve switch to the OFF position to restart the engine. Once the engine has started, move the pilot control valve and the saw drive switch to the ON position to start the saw.

MR64971,0000042 -19-05DEC01-2/2