Pre-Start Checks

CAUTION: Nothing can replace adequate training of those in the logging woods who work on or near Feller-Bunchers. While Feller-Bunchers have been a tremendous addition to mechanized logging and have made logging a much safer occupation, it is imperative that those working on or near Feller-Bunchers realize that a Feller-Buncher is a dangerous piece of equipment that MUST be respected. Those on the ground working near Feller-Bunchers MUST maintain a safe working distance (ordinarily at least 300 feet (100 meters) from the Feller-Buncher and must follow all other instructions provided on and with the Feller-Buncher and felling head. The use and operation of the felling head for any other purpose than stated in the Operator's Manual is not recommended nor approved by John Deere.

Before starting the machine, perform the Periodic Maintenance - Every 8 Hours or Daily Schedule (Section 3-4) along with any additional maintenance, based on machine hours. Also, refer to the Engine Manufacturer's Operation and Maintenance Manual supplied with the machine.

MR64971,0000056 -19-05DEC01-1/1