General
This section describes some typical problems that can be experienced with the various components or systems of the machine. The problems listed are not all the problems which can be encountered, but primarily those an operator can diagnose and repair.
Consult your authorized servicing dealer for diagnosis and repair of problems that are referenced as such or not listed in this section. A systematic approach to troubleshooting is essential and should include the following suggestions:
-
Ensure that the correct operating procedure is being followed.
-
Study the problem thoroughly before acting.
-
Do the easiest and obvious things first.
-
Find and correct the basic cause of the problem.
-
After making repairs, operate the equipment under normal conditions to verify that the problem and its cause has been corrected.
If the problem cannot be solved easily in the field, this section should provide sufficient information for an authorized dealer to determine whether tools or replacement items should be taken on site, or to suggest the movement of the machine to a shop.
|