GreaseUse grease based on NLGI consistency numbers and the expected air temperature range during the service interval. John Deere SD POLYUREA GREASE is preferred. The following greases are also recommended
Other greases may be used if they meet the following: NLGI Performance Classification GC-LB IMPORTANT: Some types of grease thickeners are not compatible with others. Consult your grease supplier before mixing different types of grease NOTE: Moly grease is not recommended for U-joint crosses. Use SD Polyurea grease in U-joint crosses under high load conditions. |
|
|
GREASE-GARD is a trademark of Deere & Company | OUO6085,00001C1 -19-24JUN04-1/1 |