After First 50 Hours - Swivel Hitch Gear Cases

IMPORTANT: Change oil in swivel hitch gear cases after the first 50 hours of use then every 250 hours of operation or yearly, whichever comes first.

Drain the oil while it is hot (i.e. after operation).

Position swivel hitch gear case in normal operating position with vertical shaft in true "vertical" position.

Pull out plugs (A) and (B) then drain the oil into a suitable receptacle.

Add 0.8 liters (0.21 US gal) of oil into the upper gear case. Add 2.4 liters (0.53 US gal) of oil into the lower gear case. Use oil specified under "Swivel Gear Case Oil".

Check the oil level at bores of level plugs (C).

Clean all plugs before reinstalling them.

A-Gear Case Refill Plugs
B-Drain Plugs
C-Level Plugs

OUO6085,00001CD -19-13APR05-1/1