| Power Requirements |
| PTO Speed |
540 Only |
| Hp 540 rpm PTO, hp (kw) |
55-75 hp (41-56 kw) |
| Power line Type |
Double Telescoping Grobe Spline |
| Hydraulic Pressure Required |
2000 PSI |
| |
| Cutterbar |
|
| Type |
John Deere |
| Cutting Width ft-in. (m) |
8 ft. 2 in. (2.5 m) |
| Cutting Height ft.-in. (m) |
1.1 - 3.8 in. (28-98 mm) without extensions; 2.8-6.6 in. (71-167 mm) with extensions |
| Number of Disks |
5 |
| Number of Knives |
10 |
| Disk Speed, rpm |
2650 rpm |
| Knife Tip Speed, mph |
191 mph |
| Disk Drive |
Gear |
| Lubrication |
Hy-Gard Oil |
| Oil Reservoir Capacity |
6 qt. |
| Cutterbar Oil Check |
Combination Check/Drain Plug |
| Cutterbar Angle |
Adjustable |
| Angle Adjustment |
Mechanical (Hydraulic Option) |
| Angle Range |
2-7 degrees |
| Cutterbar Protection |
Shear Hub |
| Adjustable Gage Shoes |
(2) Standard / Tall Shoe Option |
| |
|
| Conditioner |
|
| Impeller |
|
| Width, in. (cm) |
55.2 in. (140.1 cm) |
| Diameter, in. (cm) |
23.4 in. (59.4 cm) |
| Number of V-Tines |
33 |
| Number of Speeds |
Two speeds std (630 & 870) w/1000 kit available |
| Drive |
3-V Powerband Belt and Sheaves |
| Conditioner Hood |
Infinite adjust/single hand crank |
| Windrow Width |
31-59 in. (800-1500 mm) |
| |
|
| Tractor Hookup |
|
| Standard Hitch |
Draw bar clevis |
| Optional Hitch |
Ball Joint Equal Angle |
| |
|
| Dimensions |
|
| Overall Width |
8 ft. 2 in. (2.5 m) |
| Transport Width, ft-in. (m) |
8 ft. 2 in. (2.5 m) |
| Overall Length |
20.5 ft. (6.2 m) w/equal angle tongue |
| Transport Length, ft.-in. (m) |
20.5 ft. (6.2 m) w/equal angle tongue |
| Weight |
|
| With Impeller Conditioner, lb (kg) |
4470 lbs / 2027 kg |
| Tires |
11L15 std.; 31 x 13.5L15 Option |