Removing Mower-Conditioner from Storage (Beginning of Season)
1.
Review operator's manual and check adjustments.
2.
Lubricate complete machine. (See "Lubrication and Maintenance" section.)
3.
Drain and refill all gear cases. (See "Lubrication and Maintenance" section.)
4.
Adjust all drive belt tensions (See "Service" section).
5.
Check tire inflation.
6.
Check all hardware for tightness.
7.
If any major moving parts have been replaced, make sure they run properly.
8.
Check slip clutch to ensure it is not seized (540 rpm machines only). (See SLIPPING PTO DRIVELINE SLIP CLUTCH in Service section.)
|