-
Put mower-conditioner in a dry place.
-
Clean mower-conditioner thoroughly. Trash and dirt will draw
moisture and cause rust.
-
Thoroughly lubricate machine. (See Lubrication and Maintenance
section.)
-
Check condition of knives; reverse or replace as necessary.
-
Remove tension from main and conditioner drive belts.
-
Paint all parts where necessary.
-
Put blocking under the wheel supports, taking load off tires.
DO NOT DEFLATE TIRES. If exposed, put covers over tires to protect
them from light, grease, and oil.
-
If equipped with fire extinguisher, follow manufacturers recommendation
for inspection and maintenance. If mower-conditioner is subject to
cold weather, drain or treat fire extinguisher fluid with a nonflammable
antifreeze solution to prevent damage.
-
List replacement parts needed and order them early.