946 Center Pivot Rotary Mower-Conditioner Specifications¹

RECOMMENDED TRACTOR
35 mm (1-3/8 in.) Shaft..............	75—112 kW (100—150 hp)
44 mm (1-3/4 in.) Shaft..............	86—134 kW (115—180 hp)
Hydraulic Pressure Required..............	15 513 kPa (155.1 bar) (2 250 psi)
Power Take-Off..............	1 000 rpm

CUTTING WIDTH
946 Mower-Conditioner..............	4.0 m (13 ft. 1 in.)

CUTTING HEIGHT
Mower-Conditioner..............	17—118 mm (0.67—4.65 in.)

OVERALL WIDTH (TRANSPORT)
Standard..............	4 m (13 ft. 2 in.)

OVERALL LENGTH (TRANSPORT)
Standard..............	8.2 m (26 ft. 11 in.)

SHIPPING WEIGHT
Steel Roll..............	3 118 kg (6 874 lb.)
Urethane Roll..............	3 054 kg (6 734 lb.)
Tri-Lobe Roll..............	3 218 kg (7 095 lb.)
Impeller..............	2 976 kg (6 560 lb.)

URETHANE ROLL
Width..............	2 680 mm (106 in.)
Diameter..............	254 mm (10 in.)
Material..............	Urethane
Surface..............	Recessed cleats
Drive..............	4-V powerband belt, sheaves, gear case, and drivelines
Speed..............	800 rpm

STEEL ROLL
Width..............	2 680 mm (106 in.)
Diameter..............	254 mm (10 in.)
Material..............	Steel
Surface..............	Formed section (flutes)
Drive..............	4-V powerband belt, sheaves, gear case, and drivelines
Speed..............	800 rpm

TRI-LOBE ROLL
Width..............	2 680 mm (106 in.)
Diameter..............	254 mm (10 in.)
Surface..............	12.7 mm (0.5 in.) tall steel intermeshing flute
Drive..............	4-V powerband belt, sheaves, gear case, and drivelines
Speed..............	800 rpm

IMPELLER
Width..............	2 680 mm (106 in.)
Turn-Circle Diameter..............	594 mm (23.39 in.)
Number of Speeds..............	Two (625 or 865 rpm)
Drive..............	4-V powerband belt and sheaves

CUTTERBAR
Type..............	Rotary Disk
Number of Disks..............	8
Oil Reservoir Capacity..............	9.5L (10 qt.)
Guard Angle..............	Adjustable, 2—8 degrees

WINDROW
Formation..............	Adjustable swath board and forming shields
Width—Roll Conditioner2..............	914—2 438 mm (36—96 in.)
Width—Impeller2..............	1 143—2 438 mm (45—96 in.)

TIRES
Standard..............	12.5L-15, 8 PR