Unplugging Pickup
1.
Back clear of windrow.
NOTE:
MegaTooth and MegaWide Plus pickups require low engine rpm. Also, bump the PTO on and off to work the plug through.
2.
Regular pickup only: Operate tractor at 1500-2100 rpm and engage PTO.
IMPORTANT:
Do not prolong operating a raised pickup to clear the baler or the pickup drive may be damaged.
3.
Raise and lower pickup a couple of times by moving tractor selector valve.
4.
If baler does not clear, shut off PTO and tractor. (See UNPLUGGING BALER UNDER POWER in this section.)
5.
If baler clears, return pickup to operating height and continue baling.
|