Installing Compressor Rack Assembly (MegaWide Plus)

1. Place compressor tube (C) over top of roller baffle, with rods pointing inside pickup.

2. Fasten rubber strap with two round-head bolts (B).

3. Fasten compressor tube (C) with two round-head bolts (A) to bracket.

4. Repeat Steps 1 and 2 on other side.

5. Adjust clearance between compressor rods and rotor strippers. (See "Adjusting Compressor Rods" in this section.)


A-Round-Head Bolt and Nut (2 on each side)
B-Round-Head Bolt and Nut (2 on each side)
C-Compressor Tube

E54546

OUO6085,0000588 -19-06NOV08-1/1