Tractor Compatibility

IMPORTANT: Refer to tractor operator's manual for proper ballast.

468, 468 Silage Special, and 568 Baler Tractor Compatibility (1 of 2)
  Tractor Requirements
Model No. Recommended PTO Horsepower Implement Weight (goes into tractor ballast calculation) 7-Pin Connector Required Number of SCV Pairs Hydraulic Minimum Flow /Pressure PTO Speed
468 48 kW (65 hp) minimum 1889 kg (4165 lb) Yes One (Two if equipped with hydraulic pickup lift) 22.7-24.6 L/min (6-6.5 gpm) 540 or 1000 available
468 Silage Special 48 kW (65 hp) minimum 1889 kg (4165 lb) Yes One (Two if equipped with hydraulic pickup lift) 22.7-24.6 L/min (6-6.5 gpm) 540 or 1000 available
568 56 kW (75 hp) minimum 2145 kg (4730 lb) Yes One (Two if equipped with hydraulic pickup lift) 22.7-24.6 L/min (6-6.5 gpm) 540 or 1000 available

 

468, 468 Silage Special, and 568 Baler Tractor Compatibility (2 of 2)
  Tractor Requirements  
Model No. Road Speed Maximum Limit Drawbar Vertical Capacity Drawbar Size Electrical System Voltage Electrical System Amps Electrical System Grounding Tractor Cab Required
468 32 km/h (20 mph) 609 kg (1343 lb) Tractor with 51 mm (2-in.) thick drawbar requires baler hitch modification kit 12 VDC 20 Negative No
468 Silage Special 32 km/h (20 mph) 575 kg (1268 lb) Tractor with 51 mm (2-in.) thick drawbar requires baler hitch modification kit 12 VDC 20 Negative No
568 32 km/h (20 mph) 648 kg (1429 lb) Tractor with 51 mm (2-in.) thick drawbar requires baler hitch modification kit 12 VDC 20 Negative No

 

PP98408,0000059 -19-29JUN09-1/1