Operate Baler Safely

To avoid injury or death by being pulled into the machine:

  • DO NOT attempt to feed crop or twine into baler or unplug feed area WHILE BALER IS RUNNING. The baler feeds material faster than you can release it.
  • Disengage PTO and shut off engine.
  • Stand clear of baler at all times when machine is operating.
E32161

AG,OUMX005,1303 -19-18MAR00-1/2

If baler plugs during twine arm cycle, it is recommended that twine arms be manually positioned to release any "hold" they may have on the crop plug. Turn off power to twine arms. This will help to make the unplugging operation easier and prevent twine arms from moving unexpectedly while your hands may be in the path of the twine arms. Stay out of the path of twine arms at all times when power to the arms is ON.

E47598

AG,OUMX005,1303 -19-18MAR00-2/2