|
After the baler has been completely set up, inspect it to be sure it is in good running condition before delivering it to the customer. The following checklist is a reminder of important points to inspect. Check off each item as it is found satisfactory after proper adjustment has been made.
[ ] Baler has been assembled correctly.
[ ] Check hydraulic hose and connections for oil leaks.
[ ] With Auto-Tie option; Check monitor. Make sure communication signal is received when monitor it turned on.
[ ] Hydraulic cylinders operate properly.
[ ] Lower pickup and cycle twine arms to check for proper function.
[ ] Gate opens and closes freely.
[ ] Belt tracking is satisfactory.
[ ] Check bale shape indicator adjustment.
[ ] Check bale size alarm for proper function.
[ ] Machine lubricated and gear case level checked. (See Lubrication and Maintenance section.)
|
[ ] Drive chains have been adjusted correctly and lubricated.
[ ] Warning lights are operating correctly.
[ ] Check that shipping cover on SMV sign has been removed and sign is properly displayed.
[ ] All hardware tight.
[ ] Tire pressures checked.
[ ] Decals intact and legible.
[ ] Safety chain is attached.
[ ] Check operating functions of any optional equipment installed.
[ ] If equipped, make sure fire extinguisher is filled and pressurized.
(Date Set Up)_________________________
(Signature)___________________________
|