Installing Bale Size Alarm - Manual Hydraulic Tie1. Route bale size alarm harness (A) along tongue with hydraulic hoses and into back of tractor.2. Plug into convenience outlet. If tractor is not equipped with convenience outlet, see your John Deere dealer.
|
|
OUO6078,00000D6 -19-10JUN08-1/2 |
|
NOTE: On an excessively noisy tractor, locate alarm (A) at ear level. 3. Locate bale size alarm (A) so it is easily heard while operating the baler. Adjust shutter on alarm for desired volume. (See ADJUSTING AUDIBLE BALE SIZE ALARM VOLUME - Manual Hydraulic Tie in Operating the Baler section.)
|
|
OUO6078,00000D6 -19-10JUN08-2/2 |