BaleTrak™ Pro Monitor-Controller Error Codes

Error Code Description Solution
E0 01 Erratic supply voltage when actuator operating Check Battery
Check Alternator
Check wires and connections
see Channel 19 in Service section
E0 02 Low Voltage Check Alternator
Check wires and connections perform voltage test, see Testing Tractor Outlet Voltage, Channel 19, in Service Section
E0 03 High Voltage Check alternator
See Channel 19 in Service section
E1 02 Bale size sensor disconnected or shorted to ground Check wires and connectors
Check sensor
E1 03M Bale size sensor shorted to power Check wires and connectors
Check sensor
E1 04 Bale size sensor below working range Check sensor adjustment , see Channel 5 in Service section
E1 05 Bale size sensor above working range Check sensor adjustment , see Channel 5 in Service section
E2 01 Twine actuator disconnected Check wires and connectors
E2 02 Twine actuator faulty Check twine actuator using extend/retract switches
Check twine actuator using by-pass switch
E2 03 Timeout error during twine wrapping cycle Check for obstruction or binding
E2 04 Twine actuator harness shorted to battery Check wires and connectors
Check twine actuator
E2 05 Twine actuator harness shorted to ground Check wires and connectors
Check sensor
E4 11 Right gate switch always open Check right gate switch adjustment and function. See right gate switch adjustment and testing, Channel 14 in Service section
E4 12 Right gate switch always closed Check right gate switch adjustment and function. See right gate switch adjustment and testing, Channel 14 in Service section
E4 3 Oversize switch always open Check oversize switch adjustment and function. See oversize bale switch adjustment and testing, Channel 13 in Service section
E5 01 Open circuit, negative sensor circuit Check sensor wires, connectors, and sensors
E5 02 Grounded circuit, negative sensor circuit Check sensor wires, connectors, and sensors
E5 03 Shorted circuit, negative sensor circuit Check sensor wires, connectors, and sensors

 

OUO6078,00000EA -19-07NOV08-1/2


E5 11 Open circuit, positive sensor circuit Check sensor wires, connectors, and sensors
E5 12 Grounded circuit, positive sensor circuit Check sensor wires, connectors, and sensors
E5 13 Shorted circuit, positive sensor circuit Check sensor wires, connectors, and sensors

 

OUO6078,00000EA -19-07NOV08-2/2