OMFH309536: 458 Standard Round Baler (360001- ), Block File: PP98408_0000118_19

BALE DIAMETER
Readout Display Range	77-160 cm (30.5-63 in.)
Diameter Adjustment Range	91-152 cm (36-60 in.)
Diameter Initial Setting^a	142 cm (56 in.)
Near Full Size Range	1-27 cm (0.5-10.0 in.)
Near Full Size Initial Setting^a	4.5 in. (11 cm)

TWINE WRAP

Spacing Range	2-26 cm (1-10 in.)
Spacing Initial Setting^a	10 cm (4 in.)
Number of End Wraps Range
Left-Hand End	0-5 Wraps
Right-hand End	0.5-5 Wraps
Number of End Wraps Initial Setting^a	2 Wraps
Left-Hand End Wrap Distance Range	8-26 cm (3-10 in.)
Right-Hand End Wrap Distance Range	8-26 cm (3-10 in.)
End Wrap Distance Initial Setting (Right and Left-Hand)^a	10 cm (4 in.)
Re-Extension Wrap Distance	OFF^a, 20, 40, 60 cm (8, 16, 24 in.)
Cinch Wrap Setting (From Left-Hand End)	OFF^a, 26 cm (10 in.)
Dry Straw	OFF^a, On
Delay of Twine Eject	0-10 Seconds
Delay of Twine Eject, Initial Setting	0 Seconds
^aSettings revert to these values when monitor-controller is reset. (See BaleTrak™ Pro MONITOR-CONTROLLER-RESET TO INITIAL SETTINGS [CH 001] in this section.)

PP98408,0000118 -19-16JUN09-1/1