Adjusting Lower Roll Drive Chain

    To ensure that all slack is removed from chains;

  • Close gate and engage PTO a few seconds.
  • Stop tractor engine and remove key.

1. Open left-hand side door.

2. Loosen idler gear nut (A).

3. Push idler DOWN against chain (B) to specifications.

Specification

Idler-to-Chain -Force 22-44 N (5-10 lb force)

4. Tighten idler nut (A) to specifications.

Specification

Idler Nut -Torque 163 N·m (120 lb.-ft.)

5. Close left-hand side door.

E54007


A-Idler Gear Nut
B-Chain

PP98408,0000248 -19-23SEP09-1/1