Unplugging Pickup
1.
Back clear of windrow.
2.
Operate tractor at 1000 rpm.
IMPORTANT:
Do not prolong operating a raised pickup to clear the baler or the pickup drive may be damaged.
3.
Raise and lower pickup a couple of times by moving tractor selector valve.
4.
Slowly engage PTO a couple of times.
5.
If baler does not clear:
a.
Fully raise gate, discharge bale and shut off tractor engine.
b.
With gate open, place gate lock lever in "lock" position.
c.
Lower the pickup and unplug manually.
6.
If baler clears, return pickup to operating height and continue baling.
|