Operate Baler Safely

E32161
E32161-UN-12SEP88

To avoid injury or death by being pulled into the machine:

  • DO NOT attempt to feed crop or twine into baler or unplug feed area WHILE BALER IS RUNNING. The baler feeds material faster than you can release it.
  • Disengage PTO and shut off engine.
  • Stand clear of baler at all times when machine is operating.

E47598
E47598-UN-07JAN00

If baler plugs during twine arm cycle, it is recommended that twine arms be manually positioned to release any “hold” they have on the crop plug. Turn off power to twine arms. This procedure makes the unplugging operation easier and prevents the twine arms from moving unexpectedly. Stay out of the path of twine arms at all times when power to the arms is ON.

PP98408,0000682-19-20110927