Tractor Compatibility

IMPORTANT: See tractor operator's manual for proper ballast.

459, 459 Silage Special, 559, and 559 Silage Special Baler Tractor Compatibility (1 of 2)
	Tractor Requirements
Model No.	Recommended PTO Horsepower	Implement Weight (goes into tractor ballast calculation)	7-Pin Connector Required	Number of SCV Pairs	Hydraulic Minimum Flow Rate from SCV
459	41 kW (55 hp.) minimum	2650 kg (5843 lb.)	Yes	One (Two if equipped with hydraulic pickup lift)	22.7—24.6 L/min. (6—6.5 gpm)
459 Silage Special	41 kW (55 hp.) minimum	2650 kg (5843 lb.)	Yes	One (Two if equipped with hydraulic pickup lift)	22.7—24.6 L/min. (6—6.5 gpm)
559	41 kW (55 hp.) minimum	3092 kg (6817 lb.)	Yes	One (Two if equipped with hydraulic pickup lift)	22.7—24.6 L/min. (6—6.5 gpm)
559 Silage Special	41 kW (55 hp.) minimum	3092 kg (6817 lb.)	Yes	One (Two if equipped with hydraulic pickup lift)	22.7—24.6 L/min. (6—6.5 gpm)

459, 459 Silage Special, 559, and 559 Silage Special Baler Tractor Compatibility (2 of 2)
		Tractor Requirements
Model No.	PTO Speed	Road Speed Maximum Limit	Drawbar Vertical Capacity	Drawbar Size	Electrical System Voltage	Electrical System Amps	Electrical System Grounding	Tractor Cab Required
459	540	32 km/h (20 mph)	538 kg (1187 lb.)	Accept up to 51 mm (2 in.) thick drawbar.	12 VDC	20	Negative	No
459 Silage Special	540	32 km/h (20 mph)	538 kg (1187 lb.)	Accept up to 51 mm (2 in.) thick drawbar.	12 VDC	20	Negative	No
559	540	32 km/h (20 mph)	661 kg (1458 lb.)	Accept up to 51 mm (2 in.) thick drawbar.	12 VDC	20	Negative	No
559 Silage Special	540	32 km/h (20 mph)	661 kg (1458 lb.)	Accept up to 51 mm (2 in.) thick drawbar.	12 VDC	20	Negative	No