BaleTrak™ Pro Monitor-Controller System Introduction

E52435-UN-16JUN03

A - Monitor-Controller

The BaleTrak™ Pro system provides accurate and useful information to help the operator make the best bales possible.

In addition, the operator can adjust most control settings from the tractor seat without inconvenience or delays. By pushing a single button, twine arms can be extended or extracted, or the auto wrap cycle can be initiated.

The BaleTrak™ Pro system is factory preset, functional, and ready to use. Operate the baler briefly with factory settings to become familiar with the settings before adjusting or resetting them. The system recalls the settings when power is shut off.

NOTE: Monitor will power off after approximately 30 minutes of inactivity.

The system can be used to troubleshoot baler malfunctions and gives error code messages during malfunctions. Convenient channels are available to ensure correct baler switch and sensor adjustments.

The BaleTrak™ Pro system monitors or controls the following baling operations and conditions:

• Bale Diameter
• Bale Shape
• Automatic Twine Wrapping
• Net Wrapping (if equipped)
• Bale Eject
• Bale Count
• Gate Closed
• Slip Clutch Alert
• Variable Core Diameter (if equipped)
• Alarms
  • Gate Open
  • Oversize Bale
  • Low Tractor Voltage
  • Net Wrap Misfed or Miscut (if equipped)
  • Error Codes of System Malfunctions