Install Compressor Rack (MegaWide™ Plus)

E66832-UN-09AUG12

A - Round-Head Bolt and Nut (2 on each side)

B - Round-Head Bolt and Nut (2 on each side)

C - Compressor Tube

1. Place compressor tube (C) over top of roller baffle, with rods pointing inside pickup.

2. Fasten rubber strap with two round-head bolts (B).

3. Fasten compressor tube (C) with two round-head bolts (A) to bracket.

4. Repeat Steps 1 and 2 on other side.

5. Adjust clearance between compressor rods and rotor strippers. (See ADJUST COMPRESSOR RODS in this section.)