Adjust Starter Roll Scraper (If Equipped)

1. CAUTION:

   
   TS268-UN-23AUG88

   Be careful when working around starter roll scraper. The knife is sharp and can cause serious injury.

   Rotate starter roll in direction shown to avoid pinching fingers.

   
   E51108-UN-17JAN02

   A - Cap Screws

   B - Scraper Bar

   C - Clearance

   D - Starter Roll

   Clear area of all debris between knife and starter roll.

---




2. Loosen cap screws (A).

3. Clearance (C) must be within specifications.

   Item	Measurement	Specification
   Scraper Bar-to-Starter Roll	Clearance	0.5—1.0 mm (0.020—0.039 in.)

4. Tighten cap screws (A).

5. Manually rotate starter roll (D) to check clearance at all bars. Readjust if necessary.